TEL
+ 86-21-6420 0566
Краткое описание:
N,N-диметил-п-толуидинНомер CAS: 99-97-8
Внешний вид: Светло-желтая жидкость. Характеристики...
Номер CAS: 99-97-8
Внешний вид: Светло-желтая жидкость.
Имя | N,N-диметил-п-толуидин |
Синонимы | Диметил-п-толуидин диметил-4-толуидин N,N-диметил-п-толуидин N,N-ДИМЕТИЛ-4-ТОЛУИДИН N, N-диметил-пара-толуидин N,N,4-TRIMETHYLBENZENAMINE N,N-DIMETHYL-PARA-TOLUIDINE N,N-DIMETHYL-4-METHYLANILINE Benzeneamine,N,N,4-trimethyl- |
CAS | 99-97-8 |
EINECS | 202-805-4 |
InChI | InChI=1/C9H13N/c1-8-4-6-9(7-5-8)10(2)3/h4-7H,1-3H3 |
Молекулярная формула | C9H13N |
Молярная масса | 135.21 |
Плотность | 0.937 |
Температура плавления | -25 ° C |
Болинг Точка | 211 ℃ |
Точка возгорания | 83 ℃ |
Растворимость воды | Смешивается со спиртом, эфиром и хлороформом. Несмешиваем с водой. |
Давление пара | 0.1 гПа (20 °C) |
Показатель преломления | 1.545 |
Физические и химические свойства | Physical and chemical properties N,N-dimethylp-toluidine is a colorless or light yellow oily liquid with rotten egg flavor, melting point 130.31 ℃, boiling point 211.5-212.5 ℃, severe 0.9287~0.9366 g/mL at normal temperature, refractive index 1.5360~1.5470, insoluble in water, soluble in some organic solvents, and decomposed in light. |
Используйте | For the preparation of self-curing dental water |
Символы опасности | Т – Токсичный |
Коды рисков | R23/24/25 – Токсично при вдыхании, попадании на кожу и проглатывании. R33 – Danger of cumulative effects R52/53 – Вредно для водных организмов, может вызывать долгосрочные неблагоприятные последствия в водной среде. |
Описание безопасности | S36/37 – Надевайте подходящую защитную одежду и перчатки. S45 – В случае несчастного случая или плохого самочувствия немедленно обратитесь к врачу (по возможности покажите этикетку). S61 – Избегать попадания в окружающую среду. См. специальные инструкции/паспорта безопасности. |
Идентификаторы ООН | 1708 |
Перерабатывающие продукты | Кислота Фиолетовая 48 N-метил-п-толуидин N, 4'-ДИМЕТИЛФОРМАНИЛИД |
WGK Германия | 3 |
Номер RTECS | XU5803000 |
F | 8-10-23 |
температура самовоспламенения | 425 ° C |
ЗКТВ | Да |
таможенный кодекс | 2921 43 00 |
HazardClass | 6.1 |
PackingGroup | II |
данные о токсичных веществах | 99-97-8 (данные о вредных веществах) |
Токсичность | LD50 перорально у кроликов: 1650 мг/кг |
плотность пара | > 1 (против воздуха) |
Давление газа | 0.1 гПа (20 °C) |
показатель преломления | n20 / D 1.546 (освещен). |
точка возгорания | 182 ° F |
условия хранения | Хранить ниже + 30 ° C. |
растворимость | 0.65g / л |
acidity coefficient (pKa) | рК1:7.24(+1) (25°С) |
морфология | жидкость |
цвет | Желтый |
предельное значение взрываемости (предел взрываемости) | 7% |
Растворимость воды | Смешивается со спиртом, эфиром и хлороформом. Несмешиваем с водой. |
BRN | 774409 |
стабильность | Стабильная. Горюче. Несовместим с сильными окислителями. |
InChIKey | GYVGXEWAOAAJEU-UHFFFAOYSA-N |
(IARC) Carcinogen Classification | 2Б (Том 115) 2018 |
Информация о химических веществах Агентства по охране окружающей среды | N,N,4-Trimethylaniline (99-97-8) |
описание продукта
N,N-dimethyl p-toluidine is soluble in some organic solvents and is decomposed by light as an effective photoinitiator for acrylonitrile (AN) polymerization. It can also be used to make self-coagulation tooth tray water.
реакция полимеризации
Aromatic tertiary amines, especially N,N-dimethyl p-toluidine, are effective photoinitiators for acrylonitrile (AN) polymerization. The influence of the medium on the polymerization speed is large in polarity, and the polymerization speed is fast. Oxygen has obvious influence on the polymerization. With the increase of oxygen content, the polymerization induction period increases and the speed decreases. N,N-dimethylp-toluidine is generally considered as a retarder for alkene polymerization, rather than a photopolymerization initiator for acrylonitrile (AN).
aggregation features
N,N-dimethylp-toluidine cannot initiate acrylonitrile (AN) polymerization in the dark, but the polymerization is extremely fast under light. Fig. 1 shows the photopolymerization of acrylonitrile (AN) in the presence of N,N-dimethyl p-toluidine, naphthalene, benzophenone (BP)-triethylamine (TEA) and the polymerization of ABlN at the speeds of 0.157,0.023,0.139 and 0.045% -1 respectively, indicating that N,N-dimethyl p-toluidine is an extremely effective initiator for the photopolymerization of acrylonitrile (
N,N-dimethyl p-toluidine initiated acrylonitrile (AN) photopolymerization is carried out according to a free radical mechanism. When a trace amount of free radical capture agent is added, the polymerization is completely stopped. For example, [N,N-dimethylp-toluidine]- 10-3M, when human 200ppm 2,2,6,6, 6-tetramethylpiperidol nitroxide radical is added, acrylonitrile (AN) does not have any polymerization after 1.5 hours of light, and under the same conditions, no free radical capture agent is added, and polyacrylonitrile white precipitate appears in two minutes.
приложению
As an effective photoinitiator for acrylonitrile (AN) polymerization, its polymerization speed is proportional to the 1.62 power of AN concentration and the 0.62 power of DMT concentration. The product is usually used as an accelerator, and can also be used as an additive for the synthesis of unsaturated polyester, adhesive, etc.
метод синтеза
Using dimethyl sulfate as a methylating agent, N,N-dimethyl p-toluidine was synthesized at low temperature and normal pressure.
использование
Used to make self-setting tooth tray water
A tertiary amine that can be C- C coupled with phenylacetylene and benzamide for iron-catalyzed oxidation in the presence of di-tert-butyl peroxide to form N, 4-dimethyl-N-(3-phenylprop-2-ynyl) phenylazamine and N-((methyl (p-tolyl) amino) methyl) benzamide, respectively.