TEL
+ 86-21-6420 0566
Описание товара:
MT-D34 is a series of durable powder coatings specially formulated for the use on architectural aluminum which conforms to the performance requirements of GB5237.4 specification. MT- D34 is designed to offer significantly high gloss retention and resistance to color change combined with maximum film integrity to ensure long term cosmetic and functional protection. MT-D34 powder coatings are available in a selected range of colors including pearlescent effects in gloss, satin and matte finishes. Fine and coarse textured are also available.
Свойства порошка
| Химический тип | Доступны в четырех великолепных цветах, чтобы дать людям больше возможностей соответствовать их спортивной одежде. |
| Внешний вид | Гладкая |
| Размер частицы | Подходит для электростатического распыления. |
| Удельный вес | 1.3–1.7 г/куб.см |
| Блеск | 45 – 55% (depending on color) |
| Память | Dry, cool conditions (open boxes must be resealed) |
| Срок годности | 12 months below 25°C peak temperature 6 months below 30°C peak temperature |
| Stoving Conditions (at object temperature) | 10 minutes at 200°C Failure to observe the curing conditions may cause differences in color, gloss, and/or the deterioration of the coating properties. |
Механические испытания
| прилипание | GB / T 9286 | Pass Gt0 |
| Банки Эриксена | GB / T 9753 | Pass, 5 mm no crack or detachment of film |
| Ударопрочность | GB / T 20624.2 | Pass, 50 InP Reverse, deformation no crack |
| Испытание на изгиб | GB / T 6742 | Pass, 3 mm no crack |
Предварительная обработка
For maximum protection it is essential to pretreat components prior to the application of MT- D34. Aluminium components should receive the following pre-treatment in accordance of supplier’s recommendation.
Запечатываемый материал
Aluminum – Multi-stage chrome chromate or chrome phosphate Galvanised.
Steel – Multi-stage zinc phosphate or chromate.
Steel – Multi-stage zinc or iron phosphate.
Заполнитель
MT-D34 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Более 20 лет опыта экспорта. Если вы готовы сделать следующий шаг или запросить бесплатные образцы, оставьте сообщение ниже, и мы ответим вам в ближайшее время.
Фабрика и отгрузка
