TEL
+ 86-21-6420 0566
Описание товара:
MT-A1242 powder coating has an excellent line of coatings for coil springs, and torsion bars essential to the safe performance and comfortable ride of today’s car and truck chassis systems. MT-A1242’s single layer systems offer unyielding performance in corrosion and chip resistance balanced with excellent application efficiencies. Our patented Super Single Coat for coil springs offers superior corrosion protection and critical chip resistance to bring you the most economical and responsible choices in coatings for high performance, high tensile springs.
Свойства порошка
| Химический тип | эпоксидная смола |
| Area of usage | Пружины автомобильной подвески |
| Внешний вид | Гладкая |
| Уровень блеска (60°) | >40 ед. |
| Цвет | Черный |
| Recommended Film Thickness | 330 – 380 µm (13 – 15 mils) |
| Плотность (г / см3) | 1.41 ± 0.05 (calculated) 0.9 – 1.2 (measured, cured film) |
| Gel time (at 200 °C) | 36 - 54 с |
| Заполнитель | электростатический |
| Память | Under dry, cool (<21°C) conditions |
| Срок годности | 10 месяцев со дня производства |
| График отверждения (при температуре объекта) | 25 minutes at 150°C (time at object temperature) 25 minutes at 300°F (time at object temperature) |
Механические испытания
| прилипание | ISO 2409 | Gt 0 |
| Твердость карандаша | TSH1539G | B |
| Банки Эриксена | ISO 1520 | ≥ 8 мм |
| Ударопрочность | ISO 6272 | ≥ 140 ip (direct) ≥ 140 ip (reverse) |
Условия испытаний
Testing has been determined under laboratory conditions using the following application properties and is for guidance only.
| Запечатываемый материал | Steel panels CRS ACT B958 P90 |
| предварительная обработка | Фосфат цинка |
| Толщина пленки | 330 – 380 µ (13 – 15 mils) |
| График лечения | 20 минут при 160 ° C |
Actual film performance will depend on the individiual circumstances in which the product is used.
Предварительная обработка
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1242. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
Заполнитель
MT-A1242 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Более 20 лет опыта экспорта. Если вы готовы сделать следующий шаг или запросить бесплатные образцы, оставьте сообщение ниже, и мы ответим вам в ближайшее время.
Фабрика и отгрузка
