TEL
+ 86-21-6420 0566
Описание товара:
This series of products is made of polyester resin and hardener, and is made of high transparency materials.
Особенности продукта
Excellent gloss and vividness, the coating is crystal clear;
High transparency and image clarity, accurately reflecting the base color;
Excellent leveling, highly smooth coating surface;
Long-term durability in harsh outdoor environments, maintaining the original color of the coating;
Good matching with a variety of paints and color powder coatings.
заявка
1. Designed for surface finishing of die-cast aluminum wheels, with ultra-high transparency and standard transparency;
2. Suitable as a high-performance finishing coating for various metal appliances, such as furniture metal tripods, bicycles, locks, door handles;
3. Suitable as a finishing protective layer for metal powder coatings
Транспортная упаковка
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Гигиена и безопасность
Operators should wear anti-sit masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Свойства порошка
| Удельный вес | 1.2 ~ 1.8 г / см |
| Размер частицы | Depending on the application, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%. |
| Стабильность при хранении | Polyester powder coatings should be stored in a dry, ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for more than 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Свойства покрытия
| Тестовые | Стандарт или метод проверки | Индекс инспекции |
| Внешний вид | Визуальный осмотр | Различные эффекты поверхности доски |
| Влияние | GB / T 1732 | ≥50 кг·см |
| Изгиб | GB / T 6742 | ≤2mm |
| Обхватив | GB / T 9753 | ≥8mm |
| Твердость | GB / T 6739 | ≥H~2H |
| прилипание | GB / T 9286 | Level 0 |
| Нейтральная устойчивость к солевому туману | GB / T 1771 | 500 ч; Зона с надписями: однонаправленная ржавчина ≤2.0 мм; Зона без надписей: без отклонений |
| Влаго- и термостойкость | GB / T 1740 | 500 ч. Никаких отклонений |
| Искусственная устойчивость к старению под воздействием погодных условий | GB / T 1865 | 800 ч; Изменение цвета ≤2 уровня; Потеря блеска ≤2 уровня |
| При снижении блеска указанные выше показатели эффективности покрытия могут незначительно снижаться. | ||
| разбрызгивание | This series of products can be suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: between 40 and 150 microns, depending on the application requirements. | ||
| Условия отверждения | Recommended 200℃/10 minutes, can also be designed according to user needs: 160℃/20 minutes, 180℃/10 minutes | |
Более 20 лет опыта экспорта. Если вы готовы сделать следующий шаг или запросить бесплатные образцы, оставьте сообщение ниже, и мы ответим вам в ближайшее время.
Фабрика и отгрузка
