TEL
+ 86-21-6420 0566
Состав: Акриловая смола (45%)80%+Пигмент 7.5%+Водопонижающий агент 2%+Растворитель 5%+Вспомогательные вещества 5.5%.
Строительные добавки на масляной основе
Natural Drying Acrylic Coatings Overview
| категорию | Подробнее |
|---|---|
| Категория | Water-based/solvent-borne decorative/protective finish |
| Binder System | Thermoplastic acrylic polymer (non-crosslinking) |
| Ключевые приложения | –Building Exteriors: Stucco, masonry –Automotive: Primer/topcoat –General Metal: Equipment, railings |
| Основные свойства | –Weather Resistance: UV stable, minimal chalking –Color Retention: Excellent gloss/hue stability –Water Resistance: Forms hydrophobic film |
| Технические данные | –Dry Time: 1-2h (surface), 24h (full cure) –VOC Content: 50-250g/L –Solid Content: 30-50% – Температура нанесения: 5-35°C |
| Эффективности | –Flexibility: Moderate (may crack on >2mm bends) –Abrasion Resistance: Suitable for low-traffic areas –Adhesion: Good on properly prepared substrates |
| Процесс подачи заявки | –Methods: Brush, roller, spray –Thinning: Water (water-based) or manufacturer’s solvent –Recoating: 4-6h minimum |
| Безопасность | –Handling: Use respirator for solvent variants –Skin Contact: Wash with soap/water –Storage Temp: 5-30°C |
| ограничения | –Solvent Resistance: Not for hydrocarbon exposure –Hardness: <2H pencil –Temperature Limit: Not for >80°C surfaces |
| Регулирующий | Complies with global architectural VOC standards (EPA, EU) |
Note: Offers good balance of economy and performance for low-to-moderate corrosion environments. Suitable for DIY and maintenance applications where rapid drying is prioritized.
Фабрика и отгрузка
